Raise your Query
Hi! Simply click below and type your query.
Our experts will reply you very soon.
Raise your Query
Hi! Simply click below and type your query.
Our experts will reply you very soon.
Gold Stone Minerals
1st Floor, Opp Jain Nutan School K.t. Shah Road, Mandvi, Kutch, Gujarat - 370465, India
Mobile : +91-9825448996, +91-8000202749
Phone : +91-2834-224110
Call Us : View Primary Number
| Properties | Protocol | Unit | Result |
| Free Swelling Volume 2 gm/100ml | ASTM D 5890:1995 | ml | 32-34 |
| Methylene Blue Absorption Value | API spe 131:2004/ ISO 10416:2002 | mg/gm of clay | 400 - 450 |
| Liquid Limit | IS:12446-1988 | ml/100 gm | 600 - 700 |
| Gel Time 2.5gm/25 ml | IS:12446-1988 | second | Instant. |
| Gelling Index | IS:12446-1988 | ml | 85-90 |
| Moisture Content % by weight | API Spec. 13A:2004/ ISO 13500: 1998 | % | 10.0 - 12.0 |
| PH Value 2% slurry | IS:6186-1986 | pH | 9.5 - 9.9 |
| Green Compression Strength Bentonite : Water :10:4 55-60 A.F.S Sand | IS:12446-1988 | psi | 12.5 |
| Wet Tensile Strength | IS:12446-1988 | N/cm2 | 0.16-0.20 |
| Dry Mesh % Passing 200 B.S.S | IS:6186-1986 | % | 85 Minimum |
| Properties | Protocol | Unit | Result |
| Free Swelling Volume 2 gm/100ml | ASTM D 5890:1995 | ml | 28 - 30 |
| Methylene Blue Absorption Value | API spe 131:2004/ ISO 10416:2002 | mg/gm of clay | 350-400 |
| Liquid Limit | IS:12446-1988 | ml/100 gm | 550 - 650 |
| Gel Time 2.5gm/25 ml | IS:12446-1988 | second | Instant. |
| Gelling Index | IS:12446-1988 | ml | 75 - 85 |
| Moisture Content % by weight | API Spec. 13A:2004/ ISO 13500: 1998 | % | 10.0 - 12.0 |
| PH Value 2% slurry | IS:6186-1986 | pH | 9.5 - 9.9 |
| Green Compression Strength Bentonite : Water :10:4 55-60 A.F.S Sand | IS:1918-1966 | psi | 12 |
| Wet Tensile Strength | IS:12446-1988 | N/cm2 | 0.16-0.18 |
| Dry Mesh % Passing 200 B.S.S | IS:6186-1986 | % | 85 Minimum |
| Swelling Index | IS:6186-1986 | 10ml/gm | 24-28 |
| Properties | Protocol | Unit | REQUIRED | RESULT |
| Viscometer Dial Reading at 600 rpm | API Spec. 13A:2004/ ISO 13500: 1998 | r/min | 30 | 35-40 |
| Yield Point / Plastic Viscosity Ratio | API Spec. 13A:2004/ ISO 13500: 1998 | - | 3 Max | 2.5 |
| Filterate Volume | API Spec. 13A:2004/ ISO 13500: 1998 | ML | 15 Max | 14 |
| Moisture Content | API Spec. 13A:2004/ ISO 13500: 1998 | % by weight | 10.0 max. | 10 |
| Dry Screen Analysis(Residue Greater than 75 Microns)% | API Spec. 13A:2004/ ISO 13500: 1998 | % by weight | 4.0 max. | 3.0 - 4.0 |
| Properties | Protocol | Unit | Required | Result |
| Yield | OCMA DFCP-4 | bbls/2000lbs | 90 min | 99 - 115 |
| A.P.I. Filterate Loss | OCMA DFCP-4 | ml | 15.0 max. | 13 - 14 |
| Moisture Content | API Spec. 13A:2004/ ISO 13500: 1998 | % by weight | 15.0 max. | 10.0 - 12.0 |
| Dry Screen Analysis 100 Mesh Sieve | OCMA DFCP-4 | % by weight | 98.0 min. | 98.5 |
| Wet Screen Analysis 200 Mesh Sieve residue | OCMA DFCP-4 | % by weight | 2.5 max | 1.75 |
| Properties | Protocol | Unit | Result |
| Liquid Limit | IS:12446-1988 | ml/100 gm | 650-700 |
| Moisture Content | API Spec. 13A:2004/ ISO 13500: 1998 | % by wt. | 12.0 Max |
| Dry Screen Analysis (residue on 75 um sieve | IS:6186-1986 | % by. Wt. | 25.0 max. |
| Free Swelling Volume 2gm/100ml | ASTM D 5890:1995 | ml | 30 CC |
| PH Value of 5% gel | IS:6186-1986 | pH | 9.5 - 10.0 |
| Loose Bulk Density | IS:7589-1974 | gm/ml | 0.85 -1.0 |
| Gel Time 2.5gm/25 ml | IS:12446-1988 | second | Instant |
| Swelling Index | IS:12446-1988 | 10ml/gm | 28 |
| Gelling Index | IS:6186-1986 | ml | 75 |
| Methylene Blue Value | API spe 131:2004/ ISO 10416:2002 | mg/gm of clay | 350 - 400 |
| High Yield 120 | High Yield 145 | High Yield 180 | |||
| Concentration in pure mud | G/l | 60 | 40 | 30 | |
| After 1 hour | |||||
| Marsh Viscosity (API) | API RP 13B-2,3RD ED:1998 | Sec. | 40 min | 40 min | 40 |
| Rigidity (API) | Lbs/100ft2 | 3 min | 3 min | 3 min | |
| Filterate (API) | IS:6186-1986 | ml | 20 max | 20 max | 23 |
| Properties | Protocol | Unit | Result |
| Aspect | Yellow to reddish brown colour | ||
| Liquid Limit | IS:12446-1988 | ml/100 gm | 550-600 |
| Moisture Content | API Spec. 13A:2004/ ISO 13500: 1998 | % by. Wt. | 12.0 Max |
| Dry Screen Analysis (residue on 75 um sieve | IS:6186-1986 | % by. Wt. | 25.0 max. |
| Free Swelling Volume 2gm/100ml | ASTM D 5890:1995 | ml | 30 CC |
| PH Value of 5% gel | IS:6186-1986 | pH | 9.5Â - 10.0 |
| Loose Bulk Density | IS:7589-1974 | gm/ml | 0.85 - 1.0 |
| Gelling Time | IS:12446-1988 | second | 25 |
| Gelling Index | IS:6186-1986 | ml | 60 |
| Methylene Blue Value | API spe 131:2004/ ISO 10416:2002 | mg/gm of clay | 325 - 375 |
| PROPERTIES | PROTOCOL | UNIT | SPECIFICATION | RESULTS |
| Free Swelling Volume 2 gm/100ml | ASTM D 5890:1995 | ml | 18 to 22 | 19.00 Ml. |
| Moisture Content % by weight | IS:6186-1986 | % | 10 to 12% | 10.8% |
| Methylene Blue Absorption Value | API spe 131:2004/ ISO 10416:2002 | mg/gm of clay | 350 to 390 | 369 mg per gm |
| Dry Mesh % Passing 200 B.S.S | IS:6186-1986 | % | 10 to 12 % | 10.9% |
| PH Value 2% slurry | IS:6186-1986 | pH | 8.5 to 9.5 | 8.7 |
| Color | Off green | Off green | ||
| Powder Bulk Density | IS:7589-1974 | gm/ml | 0.95 to 1.10 gm/cc | 0.95 gm/cc |
| Montmorillonite | GEN:GL:SOP:A/302/12 | 93 to 95 % | 94% | |
| Quartz | 2 to 3% | 2.2% |
| Properties | Protocol | Unit | Result |
| Free Swelling Volume 2 gm/100ml | ASTM D 5890:1995 | ml | 28 - 30 |
| Methylene Blue Absorption Value | API spe 131:2004/ ISO 10416:2002 | mg/gm of clay | 410 - 440 |
| Liquid Limit | IS 2720(PART 5):1985 | - | 550 - 625 |
| Gel Time 2.5 gm/20 ml | IS:12446-1988 | second | Instant |
| Moisture Content % by weight | API Spec. 13A:2004/ ISO 13500: 1998 | % | 14 |
| PH Value 2% slurry | IS:6186-1986 | pH | 9.5Â - 10.0 |
| Swelling Index | IS:6186-1986 | 10ml/gm | 25 |
| Gelling Index | IS:12446-1988 | ml | 60 - 70 |
| Dry Mesh % Passing 200 B.S.S | IS:6186-1986 | % | 85 Minimum |
| Properties | Unit | Result |
| Cat Litter - Large | ||
| Granulometry 1 x 5 mm | % | (+/-) 3 |
| Moisture | % | 10.00 - 12.00 |
| Cake Weight | gm | 35 - 50 |
| Absorbancy | % | 200 |
| Clump Width | cm | 5 max |
| Clump Depth | cm | 5 max |
| Cat Litter - Ultra | ||
| Granulometry 0.5x2 mm | % | (+/-) 3 |
| Moisture | % | 10.00 - 12.00 |
| Cake Weight | gm | 30 - 40 |
| Absorbancy | % | 200 |
| Clump Width | cm | 4 max |
| Clump Depth | cm | 4 max |
| Cat Litter - Fine | ||
| Granulometry 0.2x1 mm | % | (+/-) 3 |
| Moisture | % | 10.00 - 12.00 |
| Cake Weight | gm | 30 - 40 |
| Absorbancy | % | 200 |
| Clump Width | cm | 4 max |
| Clump Depth | cm | 4 max |
| Properties | Protocol | Unit | Result |
| Free Swelling Volume 2 gm/100ml | ASTM D 5890:1995 | ml | 24-27 |
| Methylene Blue Absorption Value | API spe 131:2004/ ISO 10416:2002 | mg/gm of clay | 375-400 |
| Liquid Limit | IS:12446-1988 | ml/100 gm | 550 - 600 |
| Gel Time 2.5gm/25 ml | IS:12446-1988 | second | Instant |
| Gelling Index | IS:12446-1988 | ml | 75 - 80 |
| Moisture Content % by weight | API Spec. 13A:2004/ ISO 13500: 1998 | % | 10.0 - 12.0 |
| PH Value 2% slurry | IS:6186-1986 | pH | 9.5 - 9.8 |
| Dry Mesh % Passing 200 B.S.S | IS:6186-1986 | % | 85 Minimum |
| Swelling Index | IS:6186-1986 | 10ml/gm | 24-28 |
| Properties | Protocol | Unit | Result |
| Free Swelling Volume 2 gm/100ml | ASTM D 5890:1995 | ml | 18-21 |
| Methylene Blue Absorption Value | API spe 131:2004/ ISO 10416:2002 | mg/gm of clay | 350-375 |
| Liquid Limit | IS:12446-1988 | ml/100 gm | 500-525 |
| Gelling Index | IS:12446-1988 | ml | 65 - 75 |
| Moisture Content % by weight | API Spec. 13A:2004/ ISO 13500: 1998 | % | 10.0 - 12.0 |
| PH Value 2% slurry | IS:6186-1986 | pH | 9.0 -9.5 |
| Dry Mesh % Passing 200 B.S.S | IS:6186-1986 | % | 85 Minimum |